Improvement of the Manufacturing of Aluminum Pots Using Lean Manufacturing Tools

Juan Carlos Quiroz Flores

doi:10.1007/978-3-030-55307-4_76

Improvement of the Manufacturing of Aluminum Pots Using Lean Manufacturing Tools

Juan Carlos Quiroz Flores

Industrial Engineering School

Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

1 Scopus citations

Abstract

The department with the greatest economic dependence on the fruit
is Ancash, and the Province of Casma is most important in production, as it only
produces mango; however, at the productivity level, is a marked difference of
8.2 t/ha compared to the highest worldwide producer, Mexico. Taking this data
into consideration, an analysis of the MSEs producing mango in Casma was
conducted and problems were seen in the management of resources and processes,
both at the levels of planning and control. Considering the problems of
MSEs from Casma, a basic Production Planning and Control model was
designed based on Process Management and agricultural best practices. The
model consists of applying process management tools, such as the flow diagram,
the SIPOC turtle, data sheet indicators, procedures, and formats for each subprocess,
all with the aim of better understanding the proposal’s development and
increasing the productivity of MSEs.

Original language	English
Title of host publication	Human Interaction, Emerging Technologies and Future Applications III
Pages	871–877
Number of pages	7
DOIs	https://doi.org/10.1007/978-3-030-55307-4_76
State	Published - 25 Jul 2019

Access to Document

10.1007/978-3-030-55307-4_76

Cite this

@inbook{b5b2e49dc5e6410fbfec4aab9b5179f6,

title = "Improvement of the Manufacturing of Aluminum Pots Using Lean Manufacturing Tools",

abstract = "The department with the greatest economic dependence on the fruitis Ancash, and the Province of Casma is most important in production, as it onlyproduces mango; however, at the productivity level, is a marked difference of8.2 t/ha compared to the highest worldwide producer, Mexico. Taking this datainto consideration, an analysis of the MSEs producing mango in Casma wasconducted and problems were seen in the management of resources and processes,both at the levels of planning and control. Considering the problems ofMSEs from Casma, a basic Production Planning and Control model wasdesigned based on Process Management and agricultural best practices. Themodel consists of applying process management tools, such as the flow diagram,the SIPOC turtle, data sheet indicators, procedures, and formats for each subprocess,all with the aim of better understanding the proposal{\textquoteright}s development andincreasing the productivity of MSEs.",

keywords = "MSEs, Increasing productivity, Process Management, Agricultural best practices",

author = "{Quiroz Flores}, {Juan Carlos}",

year = "2019",

month = jul,

day = "25",

doi = "10.1007/978-3-030-55307-4_76",

language = "Ingl{\'e}s",

isbn = "9783030553067",

pages = "871–877",

booktitle = "Human Interaction, Emerging Technologies and Future Applications III",

}

TY - CHAP

T1 - Improvement of the Manufacturing of Aluminum Pots Using Lean Manufacturing Tools

AU - Quiroz Flores, Juan Carlos

PY - 2019/7/25

Y1 - 2019/7/25

N2 - The department with the greatest economic dependence on the fruitis Ancash, and the Province of Casma is most important in production, as it onlyproduces mango; however, at the productivity level, is a marked difference of8.2 t/ha compared to the highest worldwide producer, Mexico. Taking this datainto consideration, an analysis of the MSEs producing mango in Casma wasconducted and problems were seen in the management of resources and processes,both at the levels of planning and control. Considering the problems ofMSEs from Casma, a basic Production Planning and Control model wasdesigned based on Process Management and agricultural best practices. Themodel consists of applying process management tools, such as the flow diagram,the SIPOC turtle, data sheet indicators, procedures, and formats for each subprocess,all with the aim of better understanding the proposal’s development andincreasing the productivity of MSEs.

AB - The department with the greatest economic dependence on the fruitis Ancash, and the Province of Casma is most important in production, as it onlyproduces mango; however, at the productivity level, is a marked difference of8.2 t/ha compared to the highest worldwide producer, Mexico. Taking this datainto consideration, an analysis of the MSEs producing mango in Casma wasconducted and problems were seen in the management of resources and processes,both at the levels of planning and control. Considering the problems ofMSEs from Casma, a basic Production Planning and Control model wasdesigned based on Process Management and agricultural best practices. Themodel consists of applying process management tools, such as the flow diagram,the SIPOC turtle, data sheet indicators, procedures, and formats for each subprocess,all with the aim of better understanding the proposal’s development andincreasing the productivity of MSEs.

KW - MSEs

KW - Increasing productivity

KW - Process Management

KW - Agricultural best practices

UR - http://dx.doi.org/10.1007/978-3-030-55307-4_76

U2 - 10.1007/978-3-030-55307-4_76

DO - 10.1007/978-3-030-55307-4_76

M3 - Capítulo

SN - 9783030553067

SN - 9783030553074

SP - 871

EP - 877

BT - Human Interaction, Emerging Technologies and Future Applications III

ER -

Improvement of the Manufacturing of Aluminum Pots Using Lean Manufacturing Tools

Abstract

Access to Document

Other files and links

Cite this