Production management model based on LEAN, TPM, DDMRP, and change management tools to reduce lead times in an SME in the garment manufacturing sector

Cesar Cáceres-Mauricio; Daniel Romero-Vasquez; Juan Carlos Quiroz-Flores

Production management model based on LEAN, TPM, DDMRP, and change management tools to reduce lead times in an SME in the garment manufacturing sector

Cesar Cáceres-Mauricio
, Daniel Romero-Vasquez
, Juan Carlos Quiroz-Flores

Research output: Chapter in Book/Report/Conference proceeding › Paper (Conference contribution) › peer-review

7 Scopus citations

Abstract

Currently, SMEs are unable to meet the needs of customers, presenting problems for the delivery of complete orders on time. Based on an analysis of continuous improvement tools and integration of change management within the organization, a new production management model is proposed that manages to reduce delivery times; This model uses tools such as: DDMRP, 5S, JIDOKA, TPM and integrates change management with the Kotter model as a base. The proposed model was carried out in a pilot test of an SME in the textile and clothing sector, obtaining as results: an increase in Total (IF) and inventory precision of 87.77% and 95% respectively; in addition to the reduction of defective products by up to 2%.

Original language	English
Title of host publication	Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology
Subtitle of host publication	Leadership in Education and Innovation in Engineering in the Framework of Global Transformations: Integration and Alliances for Integral Development, LACCEI 2023
Editors	Maria M. Larrondo Petrie, Jose Texier, Rodolfo Andres Rivas Matta
Publisher	Latin American and Caribbean Consortium of Engineering Institutions
ISBN (Electronic)	9786289520743
State	Published - 2023
Event	21st LACCEI International Multi-Conference for Engineering, Education and Technology, LACCEI 2023 - Buenos Aires, Argentina Duration: 19 Jul 2023 → 21 Jul 2023

Publication series

Name	Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology
Volume	2023-July
ISSN (Electronic)	2414-6390

Conference

Conference	21st LACCEI International Multi-Conference for Engineering, Education and Technology, LACCEI 2023
Country/Territory	Argentina
City	Buenos Aires
Period	19/07/23 → 21/07/23

Cite this

Cáceres-Mauricio, C., Romero-Vasquez, D., & Quiroz-Flores, J. C. (2023). Production management model based on LEAN, TPM, DDMRP, and change management tools to reduce lead times in an SME in the garment manufacturing sector. In M. M. Larrondo Petrie, J. Texier, & R. A. R. Matta (Eds.), Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology: Leadership in Education and Innovation in Engineering in the Framework of Global Transformations: Integration and Alliances for Integral Development, LACCEI 2023 (Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology; Vol. 2023-July). Latin American and Caribbean Consortium of Engineering Institutions.

Cáceres-Mauricio, Cesar ; Romero-Vasquez, Daniel ; Quiroz-Flores, Juan Carlos. / Production management model based on LEAN, TPM, DDMRP, and change management tools to reduce lead times in an SME in the garment manufacturing sector. Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology: Leadership in Education and Innovation in Engineering in the Framework of Global Transformations: Integration and Alliances for Integral Development, LACCEI 2023. editor / Maria M. Larrondo Petrie ; Jose Texier ; Rodolfo Andres Rivas Matta. Latin American and Caribbean Consortium of Engineering Institutions, 2023. (Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology).

@inproceedings{d9e6253092a7408ebc51b6274f29cba7,

title = "Production management model based on LEAN, TPM, DDMRP, and change management tools to reduce lead times in an SME in the garment manufacturing sector",

abstract = "Currently, SMEs are unable to meet the needs of customers, presenting problems for the delivery of complete orders on time. Based on an analysis of continuous improvement tools and integration of change management within the organization, a new production management model is proposed that manages to reduce delivery times; This model uses tools such as: DDMRP, 5S, JIDOKA, TPM and integrates change management with the Kotter model as a base. The proposed model was carried out in a pilot test of an SME in the textile and clothing sector, obtaining as results: an increase in Total (IF) and inventory precision of 87.77\% and 95\% respectively; in addition to the reduction of defective products by up to 2\%.",

author = "Cesar C{\'a}ceres-Mauricio and Daniel Romero-Vasquez and Quiroz-Flores, \{Juan Carlos\}",

note = "Publisher Copyright: {\textcopyright} 2023 Latin American and Caribbean Consortium of Engineering Institutions. All rights reserved.; 21st LACCEI International Multi-Conference for Engineering, Education and Technology, LACCEI 2023 ; Conference date: 19-07-2023 Through 21-07-2023",

year = "2023",

language = "Ingl{\'e}s",

series = "Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology",

publisher = "Latin American and Caribbean Consortium of Engineering Institutions",

editor = "\{Larrondo Petrie\}, \{Maria M.\} and Jose Texier and Matta, \{Rodolfo Andres Rivas\}",

booktitle = "Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology",

}

Cáceres-Mauricio, C, Romero-Vasquez, D & Quiroz-Flores, JC 2023, Production management model based on LEAN, TPM, DDMRP, and change management tools to reduce lead times in an SME in the garment manufacturing sector. in MM Larrondo Petrie, J Texier & RAR Matta (eds), Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology: Leadership in Education and Innovation in Engineering in the Framework of Global Transformations: Integration and Alliances for Integral Development, LACCEI 2023. Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology, vol. 2023-July, Latin American and Caribbean Consortium of Engineering Institutions, 21st LACCEI International Multi-Conference for Engineering, Education and Technology, LACCEI 2023, Buenos Aires, Argentina, 19/07/23.

Production management model based on LEAN, TPM, DDMRP, and change management tools to reduce lead times in an SME in the garment manufacturing sector. / Cáceres-Mauricio, Cesar; Romero-Vasquez, Daniel; Quiroz-Flores, Juan Carlos.
Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology: Leadership in Education and Innovation in Engineering in the Framework of Global Transformations: Integration and Alliances for Integral Development, LACCEI 2023. ed. / Maria M. Larrondo Petrie; Jose Texier; Rodolfo Andres Rivas Matta. Latin American and Caribbean Consortium of Engineering Institutions, 2023. (Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology; Vol. 2023-July).

Research output: Chapter in Book/Report/Conference proceeding › Paper (Conference contribution) › peer-review

TY - GEN

T1 - Production management model based on LEAN, TPM, DDMRP, and change management tools to reduce lead times in an SME in the garment manufacturing sector

AU - Cáceres-Mauricio, Cesar

AU - Romero-Vasquez, Daniel

AU - Quiroz-Flores, Juan Carlos

PY - 2023

Y1 - 2023

N2 - Currently, SMEs are unable to meet the needs of customers, presenting problems for the delivery of complete orders on time. Based on an analysis of continuous improvement tools and integration of change management within the organization, a new production management model is proposed that manages to reduce delivery times; This model uses tools such as: DDMRP, 5S, JIDOKA, TPM and integrates change management with the Kotter model as a base. The proposed model was carried out in a pilot test of an SME in the textile and clothing sector, obtaining as results: an increase in Total (IF) and inventory precision of 87.77% and 95% respectively; in addition to the reduction of defective products by up to 2%.

AB - Currently, SMEs are unable to meet the needs of customers, presenting problems for the delivery of complete orders on time. Based on an analysis of continuous improvement tools and integration of change management within the organization, a new production management model is proposed that manages to reduce delivery times; This model uses tools such as: DDMRP, 5S, JIDOKA, TPM and integrates change management with the Kotter model as a base. The proposed model was carried out in a pilot test of an SME in the textile and clothing sector, obtaining as results: an increase in Total (IF) and inventory precision of 87.77% and 95% respectively; in addition to the reduction of defective products by up to 2%.

UR - https://www.scopus.com/pages/publications/85172372912

M3 - Articulo (Contribución a conferencia)

AN - SCOPUS:85172372912

T3 - Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology

BT - Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology

A2 - Larrondo Petrie, Maria M.

A2 - Texier, Jose

A2 - Matta, Rodolfo Andres Rivas

PB - Latin American and Caribbean Consortium of Engineering Institutions

T2 - 21st LACCEI International Multi-Conference for Engineering, Education and Technology, LACCEI 2023

Y2 - 19 July 2023 through 21 July 2023

ER -

Cáceres-Mauricio C, Romero-Vasquez D, Quiroz-Flores JC. Production management model based on LEAN, TPM, DDMRP, and change management tools to reduce lead times in an SME in the garment manufacturing sector. In Larrondo Petrie MM, Texier J, Matta RAR, editors, Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology: Leadership in Education and Innovation in Engineering in the Framework of Global Transformations: Integration and Alliances for Integral Development, LACCEI 2023. Latin American and Caribbean Consortium of Engineering Institutions. 2023. (Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology).

Production management model based on LEAN, TPM, DDMRP, and change management tools to reduce lead times in an SME in the garment manufacturing sector

Abstract

Publication series

Conference

Other files and links

Fingerprint

Cite this